1 bar screen with integral fairing
A rather unusual SG400 automatic bar screen was commissioned a few days ago.
It's a little unusual in that it's fitted with a full fairing, an option not often chosen.
In our case, the bar screen is installed on a substation surrounded by housing. It was therefore essential to limit both noise and odours.
As you can see from the photos below, the waste receptacle is integrated into the bar screen, and therefore protected from rain, wind and sun. A bag support is provided to hold the bag in place, and a metal sheet is formed at the level of the installation surface to send the drippings into the station. The result is a compact, clean solution totally suited to an urban environment.
If you would like more information on this option, please do not hesitate to contact us.
TECHNICAL DATA
Supply of an automatic bar screen
- Type SG400
- ALL STAINLESS STEEL 316L
- Maximum flow 120m3/h
- 30mm air gap
- Depth of infeed pipe / substation level 2800mm
- Installed in a concrete substation ∅2800mm
Options retained
- Acoustic insulation
- Manual emergency basket with 40mm air gap and winch
- Tube integrated into the frame for installation of a probe on the side of the bar screen in the substation
- Full fairing
- Deodorizer socket
- On-site transport
Project photos
