1 Bar screen with a full body work
A somewhat unusual SG400 type automatic Bar screen was commissioned a few days ago.
A little special because it is equipped with a full body work, and this option is not often chosen.
In our case, the Bar screen is installed on a station, surrounded by dwellings. It was therefore essential to limit noise, but also odors.
As you can see in the different photos below, the waste receptacle is integrated into the screen, and therefore protected from rain, wind and sun. A bag support is provided for the latter to be maintained, and a sheet at the level of the laying plane is formed so as to send the dripping juices into the station. This gives a compact, clean solution that is fully adapted to an urban environment.
We are at your disposal if you would like more information on this option.
TECHNICAL DATA
Supply of an automatic Bar screen
- Type SG400
- STAINLESS STEEL 316L
- Maxi Flow rate 120m3/h
- Bar spacing 30mm
- Depth under laying plane 2800mm
- Installed on a station ∅2800mm
Options selected
- Soundproofing
- Backup manual screen with bar spacing 40mm, and with its manual winch
- Tube integrated into the frame for installing a probe on the side of the bar screen in the station
- Full body work
- Deodorization plug
- On-site transport
PROJECT PHOTOS
